[ome-users] Upgrade problem
Kenneth Gillen
k.h.gillen at dundee.ac.uk
Mon Sep 15 17:46:40 BST 2014
Can we confirm that you did a full operating system restart, just to rule
that out?
Thanks,
Kenny
--
Kenneth Gillen
OME System Administrator
Wellcome Trust Centre for Gene Regulation & Expression
College of Life Sciences
MSI/WTB/JBC Complex
University of Dundee
Dow Street
Dundee DD1 5EH
United Kingdom
Tel: +44 (0) 1382 386364
Skype: kennethgillen
http://www.twitter.com/openmicroscopy
On 15/09/2014 17:44, "Kotecki, Jason" <Jason.Kotecki at vai.org> wrote:
>Simon, I have not had any success with the upgrade. I have tried a fresh
>install and did the line by line config import with the same result.
>
>Thanks,
>Jason
>
>-----Original Message-----
>From: Simon Li [mailto:s.p.li at dundee.ac.uk]
>Sent: Monday, September 15, 2014 12:31 PM
>To: Kotecki, Jason; Josh Moore
>Cc: ome-users at lists.openmicroscopy.org.uk
>Subject: Re: [ome-users] Upgrade problem
>
>Hi Jason
>
>Have you managed to get any further with this? An upgrade from 5.0.2 to
>5.0.4 hasn¹t shown any obvious problems here on Windows. If not, could
>you run
>
>> sc query state= all type= service
>
>At a command prompt and see if OMERO.master is listed (I wouldn¹t expect
>it to be if Blitz failed to start, if it is post the relevant output).
>Then perhaps try a reboot and a fresh install: rename your existing 5.0.4
>server directory, unzip a fresh server, then run bin\omero config set Š
>individually for each config line instead of copying an existing
>config.xml file.
>
>Cheers
>
>Simon
>
>On 11/09/2014 20:48, "Kotecki, Jason" <Jason.Kotecki at vai.org> wrote:
>
>>Sorry. Here is the correct diags file.
>>
>>-Jason
>>
>>-----Original Message-----
>>From: Josh Moore [mailto:josh at glencoesoftware.com]
>>Sent: Thursday, September 11, 2014 3:44 PM
>>To: Kotecki, Jason
>>Cc: Kenneth Gillen; ome-users at lists.openmicroscopy.org.uk
>>Subject: Re: [ome-users] Upgrade problem
>>
>>
>>On Sep 11, 2014, at 9:39 PM, Kotecki, Jason wrote:
>>
>>> Here you go. Thanks for your help.
>>
>>It's interesting that Blitz is now running:
>>
>>Server: Blitz-0 active (pid = 2416, enabled)
>>
>>
>>but there's still no log file:
>>
>>Log files: Blitz-0.log n/a
>>
>>
>>Is the service bouncing? (i.e. the pid changing frequently)
>>
>>~J.
>>
>>
>>> -Jason
>>>
>>> -----Original Message-----
>>> From: Josh Moore [mailto:josh at glencoesoftware.com]
>>> Sent: Thursday, September 11, 2014 3:37 PM
>>> To: Kotecki, Jason
>>> Cc: Kenneth Gillen; ome-users at lists.openmicroscopy.org.uk
>>> Subject: Re: [ome-users] Upgrade problem
>>>
>>> And one last data point for the evening with the hopes that I'll be
>>> more creative in the morning: could you send the current output of
>>> bin\omero admin diagnostics
>>>
>>> Thanks,
>>> ~Josh.
>>>
>>> On Sep 11, 2014, at 9:31 PM, Kotecki, Jason wrote:
>>>
>>>> The only errors in the event log are related to the 'ISAPI Filter or
>>>>Extension'.
>>>>
>>>> -Jason
>>>>
>>>> -----Original Message-----
>>>> From: Josh Moore [mailto:josh at glencoesoftware.com]
>>>> Sent: Thursday, September 11, 2014 3:09 PM
>>>> To: Kotecki, Jason
>>>> Cc: Kenneth Gillen; ome-users at lists.openmicroscopy.org.uk
>>>> Subject: Re: [ome-users] Upgrade problem
>>>>
>>>>
>>>> On Sep 11, 2014, at 8:40 PM, Kotecki, Jason wrote:
>>>>
>>>>> I followed your instructions and had the same result. I attached
>>>>>the two XML files.
>>>>>
>>>>> -Jason
>>>>
>>>> Hmmm....both of the files are well-formed. Is there a new event in
>>>>the EventViewer of the form:
>>>>
>>>>>>> failed to deploy application
>>>>>>>`C:\OMERO.server\etc\grid\windefault.xml':
>>>>>>> DescriptorParser.cpp:781: IceXML::ParserException error in
>>>>>>><C:/OMERO.server/etc/grid/generated.xml> descriptor, line 1,
>>>>>>>column
>>>>>>>161:
>>>>>>> duplicate property set `Blitz'
>>>>
>>>>
>>>> since I certainly only see <properties id="Blitz"> once in your
>>>>generated.xml now.
>>>>
>>>> Thanks for the sleuthing,
>>>> ~Josh.
>>>>
>>>>
>>>>> -----Original Message-----
>>>>> From: Josh Moore [mailto:josh at glencoesoftware.com]
>>>>> Sent: Thursday, September 11, 2014 2:21 PM
>>>>> To: Kotecki, Jason
>>>>> Cc: Kenneth Gillen; ome-users at lists.openmicroscopy.org.uk
>>>>> Subject: Re: [ome-users] Upgrade problem
>>>>>
>>>>>
>>>>> On Sep 11, 2014, at 8:03 PM, Kotecki, Jason wrote:
>>>>>
>>>>>> Josh, I deleted the generated.xml and tried starting Omero.
>>>>>>Unfortunately the result is the same.
>>>>>
>>>>> And this is with the config.xml copied from your earlier
>>>>>installation? If so, could you try:
>>>>>
>>>>> * (working install) bin\omero config get > config.properties
>>>>> * (broken install) delete both config.xml and generated.xml
>>>>> * (broken install) bin\omero config load config.properties
>>>>> * (broken install) bin\omero admin start
>>>>>
>>>>> I'm wondering if something has happened with the line-endings which
>>>>>is causing the XML generation to fail. (You could also send the two
>>>>>XML files for investigation if there are no sensitive passwords in
>>>>>the them).
>>>>>
>>>>> Cheers,
>>>>> ~Josh.
>>>>>
>>>>>> -Jason
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Josh Moore [mailto:josh at glencoesoftware.com]
>>>>>> Sent: Thursday, September 11, 2014 10:55 AM
>>>>>> To: Kotecki, Jason
>>>>>> Cc: Kenneth Gillen; ome-users at lists.openmicroscopy.org.uk
>>>>>> Subject: Re: [ome-users] Upgrade problem
>>>>>>
>>>>>>
>>>>>> On Sep 11, 2014, at 4:52 PM, Kotecki, Jason wrote:
>>>>>>
>>>>>>> Josh, when I run in foreground mode this is what I see:
>>>>>>>
>>>>>>> C:\OMERO.server\bin>omero admin start --foreground No descriptor
>>>>>>> given. Using etc\grid\windefault.xml
>>>>>>
>>>>>> Which makes sense. No errors, so that's a start.
>>>>>>
>>>>>>
>>>>>>> I just checked the event viewer and I do see a warning from
>>>>>>>'OMERO.master':
>>>>>>>
>>>>>>> The description for Event ID 0 from source OMERO.master cannot be
>>>>>>>found. Either the component that raises this event is not
>>>>>>>installed on your local computer or the installation is corrupted.
>>>>>>>You can install or repair the component on the local computer.
>>>>>>>
>>>>>>> If the event originated on another computer, the display
>>>>>>>information had to be saved with the event.
>>>>>>>
>>>>>>> The following information was included with the event:
>>>>>>>
>>>>>>> failed to deploy application
>>>>>>>`C:\OMERO.server\etc\grid\windefault.xml':
>>>>>>> DescriptorParser.cpp:781: IceXML::ParserException error in
>>>>>>><C:/OMERO.server/etc/grid/generated.xml> descriptor, line 1,
>>>>>>>column
>>>>>>>161:
>>>>>>> duplicate property set `Blitz'
>>>>>>
>>>>>> Ah, so this is useful. It does seem like your generated.xml is
>>>>>>corrupt. Can you try deleting it and retrying?
>>>>>>
>>>>>>
>>>>>>> There is also an error from 'ISAPI Filter or Extension':
>>>>>>> The description for Event ID 4097 from source ISAPI Filter or
>>>>>>>Extension cannot be found. Either the component that raises this
>>>>>>>event is not installed on your local computer or the installation
>>>>>>>is corrupted. You can install or repair the component on the local
>>>>>>>computer.
>>>>>>>
>>>>>>> If the event originated on another computer, the display
>>>>>>>information had to be saved with the event.
>>>>>>>
>>>>>>> The following information was included with the event:
>>>>>>>
>>>>>>> Failed to import callback module 'omero_web_iis'
>>>>>>> Access is denied.
>>>>>>
>>>>>> Hmmm.... this is not related, but if it persists, we'll need to
>>>>>>addresss it as well. But first let's get Blitz running.
>>>>>>
>>>>>> Thanks for your patience,
>>>>>> ~Josh
>>>>>>
>>>>>>
>>>>>>> Thanks,
>>>>>>> Jason Kotecki
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Josh Moore [mailto:josh at glencoesoftware.com]
>>>>>>> Sent: Thursday, September 11, 2014 10:35 AM
>>>>>>> To: Kotecki, Jason
>>>>>>> Cc: Kenneth Gillen; ome-users at lists.openmicroscopy.org.uk
>>>>>>> Subject: Re: [ome-users] Upgrade problem
>>>>>>>
>>>>>>> Hi Jason,
>>>>>>>
>>>>>>> On Sep 11, 2014, at 3:56 PM, Kotecki, Jason wrote:
>>>>>>>
>>>>>>>> Thanks for your help. I have verified the permissions and that
>>>>>>>>is not the issue. I downloaded version 5.0.3 and I am
>>>>>>>>experiencing the same problem as 5.0.4. The Blitz.log file is not
>>>>>>>>created. Did something change from version 5.0.2 that the
>>>>>>>>services start differently?
>>>>>>>
>>>>>>> Not particularly. As you noticed, though, there is a new file
>>>>>>>(generated.xml) which allows us to automatically set JVM
>>>>>>>properties from etc/grid/templates.xml. Try bin/omero admin jvmcfg
>>>>>>>for the values that the server will use.
>>>>>>>
>>>>>>>
>>>>>>>> I noticed that there is a new xml file in the versions after
>>>>>>>>5.0.2, /etc/grid/generated.xml. This file has a line related to
>>>>>>>>blitz with the word 'REPLACEME'. Is this something I need to
>>>>>>>>change?
>>>>>>>>
>>>>>>>> <property name="REPLACEMENT:blitz" value="REPLACEME" />
>>>>>>>
>>>>>>> You shouldn't need to perform any manual replacement.
>>>>>>>
>>>>>>> Coming late to this thread a couple of questions:
>>>>>>> * Have you checked the Windows EventViewer for any errors?
>>>>>>> * Did bin\omero admin start --foreground show any errors?
>>>>>>>
>>>>>>> Cheers,
>>>>>>> ~Josh
>>>>>>>
>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Jason
>>>>>>>>
>>>>>>>> From: Kenneth Gillen [mailto:k.h.gillen at dundee.ac.uk]
>>>>>>>> Sent: Wednesday, September 10, 2014 10:19 AM
>>>>>>>> To: Kotecki, Jason; ome-users at lists.openmicroscopy.org.uk
>>>>>>>> Subject: Re: [ome-users] Upgrade problem
>>>>>>>>
>>>>>>>> The only thing I've had trouble with, using that exact workflow,
>>>>>>>>is not adding the OMERO service user's permissions to access the
>>>>>>>>new folder c:\OMERO.server after creating it for the latest OMERO
>>>>>>>>upgrade - worth checking that.
>>>>>>>>
>>>>>>>> Best,
>>>>>>>>
>>>>>>>> Kenny
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>> Kenneth Gillen
>>>>>>>> OME System Administrator
>>>>>>>>
>>>>>>>> Wellcome Trust Centre for Gene Regulation & Expression College
>>>>>>>> of Life Sciences MSI/WTB/JBC Complex University of Dundee Dow
>>>>>>>> Street Dundee
>>>>>>>> DD1 5EH United Kingdom
>>>>>>>>
>>>>>>>> Tel: +44 (0) 1382 386364
>>>>>>>> Skype: kennethgillen
>>>>>>>>
>>>>>>>> http://scanmail.trustwave.com/?c=129&d=47SR1FVGblQi-14COp4zgQSJD
>>>>>>>> N
>>>>>>>> -
>>>>>>>> X
>>>>>>>> I
>>>>>>>> N
>>>>>>>> 0
>>>>>>>>
>>>>>>>>c1u_sd4uoxA&u=http%3a%2f%2fwww%2etwitter%2ecom%2fopenmicroscopy<h
>>>>>>>>ttp
>>>>>>>>:
>>>>>>>> /
>>>>>>>>
>>>>>>>>/scanmail.trustwave.com/?c=129&d=47SR1FVGblQi-14COp4zgQSJDN-XIN0c
>>>>>>>> 1 u _ s d
>>>>>>>> 4uoxA&u=http%3a%2f%2fwww%2etwitter%2ecom%2fopenmicroscopy>
>>>>>>>>
>>>>>>>> From: <Kotecki>, Jason
>>>>>>>> <Jason.Kotecki at vai.org<mailto:Jason.Kotecki at vai.org>>
>>>>>>>> Date: Wednesday, 10 September 2014 15:11
>>>>>>>> To:
>>>>>>>> "ome-users at lists.openmicroscopy.org.uk<mailto:ome-users at lists.op
>>>>>>>> e
>>>>>>>> n
>>>>>>>> m
>>>>>>>> i
>>>>>>>> c
>>>>>>>> r
>>>>>>>>
>>>>>>>>http://scanmail.trustwave.com/?c=129&d=hfuR1JjEbat4yyYn1cx0CLO3ma
>>>>>>>>O1m JlF2EMSmpRSkw&u=http%3a%2f%2foscopy%2eorg%2euk>"
>>>>>>>>
>>>>>>>><ome-users at lists.openmicroscopy.org.uk<mailto:ome-users at lists.ope
>>>>>>>> n
>>>>>>>> m
>>>>>>>> i
>>>>>>>> c
>>>>>>>> r
>>>>>>>>
>>>>>>>>http://scanmail.trustwave.com/?c=129&d=0beR1HQ5DR6Yi55RjWru_1xBac
>>>>>>>> D
>>>>>>>> 3 Z M -nEopOe2A80A&u=http%3a%2f%2foscopy%2eorg%2euk>>
>>>>>>>> Subject: [ome-users] Upgrade problem
>>>>>>>>
>>>>>>>> Hello, I recently attempted the upgrade from 5.0.2 to 5.0.4. I'm
>>>>>>>>running on a Windows server using IIS. The process I did was:
>>>>>>>>
>>>>>>>> 1. Backup the database
>>>>>>>>
>>>>>>>> 2. Ran 'omero admin stop'
>>>>>>>>
>>>>>>>> 3. Ran 'omero web iis -remove'
>>>>>>>>
>>>>>>>> 4. Renamed the 'Omero.server' folder to 'Omero.server.OLD'
>>>>>>>>
>>>>>>>> 5. Extracted the 'OMERO.server-5.0.4-ice34-b43.zip' to
>>>>>>>>'Omero.server.
>>>>>>>>
>>>>>>>> 6. Copied the '/etc/grid/config.xml' file from my old folder
>>>>>>>>to the new folder.
>>>>>>>>
>>>>>>>> 7. Ran 'omero web iis'
>>>>>>>>
>>>>>>>> 8. Ran 'omero admin start'.
>>>>>>>>
>>>>>>>> Here is the output of that start command:
>>>>>>>>
>>>>>>>> C:\OMERO.server\bin>omero admin start No descriptor given. Using
>>>>>>>>etc\grid\windefault.xml Installing OMERO.master Windows service.
>>>>>>>> Successfully installed OMERO.master Windows service.
>>>>>>>> Starting OMERO.master Windows service.
>>>>>>>> Waiting on startup. Use CTRL-C to exit
>>>>>>>>.............................
>>>>>>>> Failed to startup some components after 300 seconds Calling "stop"
>>>>>>>> on remaining components OMERO.master service deleted.
>>>>>>>> Waiting on shutdown. Use CTRL-C to exit C:\OMERO.server\bin>
>>>>>>>>
>>>>>>>> I also attached the results of the 'omero admin diagnostics'
>>>>>>>>command.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Jason Kotecki
>>>>> <generated.xml><config.xml>
>>> <omero_diags.txt>
>
>
>The University of Dundee is a registered Scottish Charity, No: SC015096
>_______________________________________________
>ome-users mailing list
>ome-users at lists.openmicroscopy.org.uk
>http://lists.openmicroscopy.org.uk/mailman/listinfo/ome-users
The University of Dundee is a registered Scottish Charity, No: SC015096
More information about the ome-users
mailing list