[ome-users] general server settings for omero clients

[MEYENHOFER Felix]

Hi Dominik

thanks, saved me a lot of searching.

Best, 

Felix

> On 07 Apr 2016, at 12:02 , Dominik Lindner (Staff) <d.lindner at dundee.ac.uk> wrote:
> 
> Hi Felix,
> 
> for Insight you can preset the OMERO server in the file config/container.xml before handing the client over to your users (see “OMERODS” service).
> 
> Regards,
> Dominik
> 
> 
>> On 6 Apr 2016, at 11:27, MEYENHOFER Felix <felix.meyenhofer at unifr.ch> wrote:
>> 
>> Hi
>> 
>> I didn’t find a way yet how I could go about setting server settings for all users on a given machine. The goal would be to that users don’t have to configure for our OMERO server each time they start the client for the first time.
>> 
>> I would be grateful if someone could point me in the right direction to figure out the configuration mechanisms for the OMERO clients. Is there a neat way without touching the sources? Thanks in advance.
>> 
>> Best,
>> 
>> -------------------------------------
>> Felix Meyenhofer
>> Université de Fribourg
>> Département de Médecine - Anatomie
>> 1, Rte. Albert Gockel
>> CH-1700 Fribourg
>> 
>> Tel:  +41 26 300 85 45
>> Web:  www.unifr.ch/anatomy
>>     www.unifr.ch/bioimage
>> -------------------------------------
>> 
>> _______________________________________________
>> ome-users mailing list
>> ome-users at lists.openmicroscopy.org.uk
>> http://lists.openmicroscopy.org.uk/mailman/listinfo/ome-users
> 
> 
> The University of Dundee is a registered Scottish Charity, No: SC015096
> _______________________________________________
> ome-users mailing list
> ome-users at lists.openmicroscopy.org.uk
> http://lists.openmicroscopy.org.uk/mailman/listinfo/ome-users